Kundvagnen är tom

CISCO 2-Port Voice Interface Card FXS and DID

Förstasidan / Kommunikation / Routrar & Brandväggar / CISCO 2-Port Voice Interface Card FXS and DID

CISCO 2-Port Voice Interface Card FXS and DID (VIC3-2FXS-E/DID= $DEL)

CISCO 2-Port Voice Interface Card FXS and DID

Artikelnr: VIC3-2FXS-E/DID= $DEL
EAN: 0882658187568
14.310:-
17.887,50 inkl. moms
Beskrivning

Enhanced Foreign Exchange Station / Direct Inward Dialing (FXS/DID) Voice Interface Card


VIC3-2FXS-E/DID

Cisco® has added the Enhanced Foreign Exchange Station / Direct Inward Dialing (FXS/DID) Voice Interface Card (VIC3-2FXS-E/DID) to its FXS portfolio to address the need for longer loop lengths and to accommodate specialty phones. The VIC3-2FXS-E/DID offers higher ringing voltage for longer loops and increased FXS feed current for specialty phones. It is thus able to accommodate remotely located phones, fax machines, or modems up to 11,000 feet (3.4 kilometers). It is able to drive many specialty phones requiring higher loop power for proper operation.

The VIC3-2FXS-E/DID module supports all the voice features that exist on VIC and VIC2 modules. In addition, the VIC3-2FXS-E/DID module also supports:

  • Mixed FXS and DID ports within the same VIC module
  • Higher ringing voltage-65 Vrms (no load)
  • Higher loop current 35 mA-to accommodate specialty phones
  • Longer loop length-for loops with 26 AWG wire, up to 11,000 feet (3,400 meters)
  • Device security-to distinguish between Cisco genuine and non-genuine Cisco modules
  • Surge and Transient Protection per Network Equipment Building Standards (NEBS) (GR1089) Level 3 Type 1 and 3

The VIC3-2FXS-E/DID module allows longer loops-up to 1400-Ohms loop resistance (off-hook phone / terminal equipment included), with maximum loop lengths up to 11,000 feet (3,400 meters). Loops using smaller diameter wires will have higher resistance and may reduce the allowable loop length. FXS loops longer than 11,000 feet (3,400 meters) are not supported, regardless of wire size or resistance.

The 2 REN load maximum limitation for VIC3-2FXS-E/DID ensures proper ring trip operation for short as well as extended loops.

The higher ringing voltage supported by the VIC3-2FXS-E/DID is large enough to illuminate neon lamps in many neon-lamp analog telephones during the ringing On period. Visual indication of incoming calls is advantageous in call center environments.

The higher (35 mA) FXS off-hook loop current supported by VIC3-2FXS-E/DID accommodates many specialty phones that require higher power to operate. The other VICs limit off-hook loop current to 25 mA.

The Enhanced Voice/Fax VIC module, VIC3-2FXS-E/DID, is designated as an Off-Premise Extension Lite product offering. This means that while the module addresses a subset of the off-premise extension applications, the module is not in full compliance for off-premise usage. Care should be exercised so that the product is deployed and operated within its specifications. Appropriate external primary protection must always be applied to Tip/Ring conductors prior to their exiting a building should the loop be extended off-premise.

Specifications

FXS REN: Maximum Loading

SKU

FXS only

Mixed FXS & DID ports

Max REN per VIC

VIC3-2FXS-E/DID

2 REN per FXS port

2 REN per FXS port

4 REN per VIC

VIC3-2FXS/DID

5 REN per FXS port

2 REN per FXS port

8 REN per VIC

VIC3-4FXS/DID

5 REN per FXS port

2 REN per FXS port

8 REN per VIC

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.

Copyright © 2021 WeKuData AB