Var god vänta...
Produkten har lagts till i kundvagnen. Se kundvagnen här
Kundvagnen är tom

CISCO Cat6500/16 Port Gigabit Enet w/DFC3CXL

Förstasidan Kommunikation Switchar CISCO Cat6500/16 Port Gigabit Enet w/DFC3CXL
CISCO Cat6500/ 16 Port Gigabit Enet w/DFC3CXL (WS-X6716-10G-3CXL= $DEL)

CISCO Cat6500/16 Port Gigabit Enet w/DFC3CXL

Artikelnr: WS-X6716-10G-3CXL= $DEL
EAN: 0882658164798
  • Produkt Modul
  • Portar 16
  • Hastighet 10Gbps
688 228:-
860 285:- inkl. moms
Beskrivning

Cisco Catalyst 6500 Series 10 Gigabit Ethernet Interface Modules

The Cisco® Catalyst® 6500 Series offer a variety of 10 Gigabit Ethernet modules to serve different needs in the campus and data center for enterprise, commercial, and service provider customers: 16-port 10 Gigabit Ethernet module, 8-port 10 Gigabit Ethernet module, and 4-port 10 Gigabit Ethernet module. These modules support pluggable optics to support distances up to 80 km over single-mode fiber, 300m over multimode fiber, and 15m over copper.

16-Port 10 Gigabit Ethernet Module
The 16-port 10 Gigabit Ethernet module provides up to 130 10 Gigabit Ethernet ports in a single Cisco Catalyst 6500 chassis and 260 10 Gigabit Ethernet ports in a virtual switching system (VSS) and is targeted for LAN campus aggregation and data center access, where fanout and port density are very important. It consists of 4 port groups of 4 ports each. Users can operate each port group in either oversubcription mode (2 to 4 ports used per port group) or performance mode (1 port used per port group), allowing maximum flexibility for using some ports for connection to servers in performance mode and some other uplinks to wiring closets in oversubscription mode. When in performance mode, up to four 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.1 In addition, the 16-port 10 Gigabit Ethernet module has reduced power consumption. It uses half the power per port compared to the 8-port 10 Gigabit Ethernet module, providing substantial power savings to the customer.

8-Port 10 Gigabit Ethernet Module
The 8-port 10 Gigabit Ethernet module provides up to 66 10 Gigabit Ethernet ports in a single Cisco Catalyst 6500 chassis and 132 10 Gigabit Ethernet ports in a VSS. It supports 64 Gbps of local switching, ideal for deployment in the core or aggregation layer of LAN campus and data centers. All 8 ports can be used to create a virtual switch link in a VSS.

4-Port 10 Gigabit Ethernet Module
The 4-port 10 Gigabit Ethernet module has no oversubcription and is targeted for deployments where line rate is important. It provides up to 34 10 Gigabit Ethernet ports in a single Cisco Catalyst 6500 chassis and 68 10 Gigabit Ethernet ports in a VSS.

All three modules are interoperable with the Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10 Gigabit Ethernet uplinks and Cisco Catalyst 6500 Series Supervisor Engine 720 and provide 40-Gbps connection to the switch fabric. Building upon the award-winning Cisco Catalyst 6500 Series, these 10 Gigabit Ethernet modules are backward compatible with all existing Cisco Catalyst 6500 line cards and services modules, enabling enterprises and service providers to offer new Layer 2 through 7 services and network capabilities to increase revenue and user productivity without complete equipment upgrades.
The Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules are designed for deployment in the distribution and core of campus and data center for traffic aggregation or for interbuilding, points of presence (POPs), WAN edge, and MAN connections. These modules support IEEE 802.3ad link aggregation and Cisco distributed EtherChannel® technology for fault-tolerant connectivity and bandwidth scalability of up to 80 Gbps per EtherChannel connection using any 8 ports in the same chassis. In addition, they support hardware-based multicast replication, quality of service (QoS), access control lists (ACLs), jumbo frames, and low latency to enable secure and predictable performance for bandwidth-intensive applications.

Applications
• 16-port 10 Gigabit Ethernet module: LAN campus and data center distribution; data center access, where fanout and port density are important
• 8-port 10 Gigabit Ethernet module: data center core and distribution, LAN campus core and distribution, and service provider
• 4-port 10 Gigabit Ethernet module: core, interbuilding connections, POPs, WAN edge, and MAN connections, where no oversubscription and medium to low 10 Gigabit Ethernet density is required

Feature

WS-X6704-10GE

WS-X6708-10G-3C

WS-X6708-10G-3CXL

WS-X6716-10G-3C

WS-X6716-10G-3CXL

Ports

4

8

16

Optics

XENPAK

X2

X2

Switch Fabric Connection

40 Gbps (80 Gbps full duplex)

40 Gbps (80 Gbps full duplex)

40 Gbps (80 Gbps full duplex)

Oversubscription

1:1
2:1
4:1

Forwarding Engine

• Default: centralized forwarding (CFC)
• Optional: distributed forwarding with DFC3A, DFC3B, DFC3BXL, DFC3C, or DFC3CXL
• WS-X6708-10G-3C: equipped with DFC3C for distributed forwarding, supporting 256K routes
• WS-X6708-10G-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1M routes
• WS-X6716-10G-3C: equipped with DFC3C for distributed forwarding, supporting 256K routes
• WS-X6716-10G-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1M routes

Queues

• RX: 8q8t
• TX: 1p7q8t
• RX: 8q4t
• TX: 1p7q4t
Oversubscription mode:
• RX: 1p7q2t per port
• TX: 1p7q4t per port group
Performance mode:
• RX: 8q4t per port
• TX: 1p7q4t per port

Queuing Mechanisms

• Class of service (CoS)-based queue mapping
• CoS-based queue mapping
• Differentiated services code point (DSCP)-based queue mapping
• CoS-based queue mapping
• DSCP-based queue mapping

Scheduler

Deficit Weighted Round Robin (DWRR)

Weighted Random Early Detection (WRED)

DWRR

WRED

Shaped Round Robin (SRR) at egress

Oversubscription mode:

• DWRR
• WRED

Performance mode:

• DWRR
• WRED
• SRR at egress

Port Buffers

16 MB per port

200 MB per port

Oversubscription mode:

90 MB per port group

Performance mode:

200 MB per port

Hardware-Based Multicast Replication

Ingress and egress

~20G per replication engine

2 replication engines per module

Ingress and egress

~50G per replication engine

2 replication engines per module

Ingress and egress

~50G per replication engine

2 replication engines per module

Jumbo Frame Support for Bridged and Routed Packets

Up to 9216 bytes

Up to 9216 bytes

Up to 9216 bytes

Maximum Port Density per Chassis

34 ports (9-slot chassis)

66 ports (9-slot chassis)

130 ports (9-slot chassis)

Maximum Port Density per VSS

68 ports

132 ports

260 ports

Can Be Used to Form Virtual Switch Link

No

Yes

Performance mode-Yes (supported in a subsequent software release)

Oversubscription mode-No

Supervisor Engines Supported

Virtual Switching Supervisor Engine 720-10G or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode)

Virtual Switching Supervisor Engine 720-10G or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode)

Virtual Switching Supervisor Engine 720-10G or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode)

Chassis Supported

• Any Cisco Catalyst 6500 E-Series chassis, C6509-NEB-A chassis, non-E-Series chassis with Fan Tray 2, or Cisco 7600 Series chassis, 7600-S Series chassis (NEBS compliant: operating temperature up to 55°C)
• Not supported in Cisco Catalyst 6503 non-E Series chassis
• Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E chassis, 6509-V-E chassis, and C6509-NEB-A chassis with dual fan tray, or the Cisco 7604 chassis and 7609 chassis with dual fan tray, or 7600-S Series chassis (NEBS compliant: operating temperature up to 55°C)

Or

• Non-E-Series chassis with Fan Tray 2, including 6506, 6509, 6513 chassis, and C6509-NEB-A with single fan tray or the Cisco 7606, 7613 chassis and 7609 chassis with single fan tray (non-NEBS compliant: operating temperature up to 40°C)
• Not supported in Cisco Catalyst 6503 non-E Series chassis
• Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E chassis, 6509-V-E chassis and C6509-NEB-A chassis with dual fan tray (NEBS compliant: operating temperature up to 55°C)

Or

• Non-E-Series chassis with Fan Tray 2, including 6506, 6509, 6513 chassis, and C6509-NEB-A with single fan tray (non-NEBS compliant: operating temperature up to 40°C)
• Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis

Slot Requirements

Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, 6509-NEB-A, Cisco 7604, 7607, 7609, 7600-S Series chassis; can only occupy slots 9 through 13 in a Cisco Catalyst 6513 or Cisco 7613 chassis

Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, 6509-NEB-A, Cisco 7604, 7606, 7609, 7600-S Series chassis; can only occupy slots 9 through 13 in a Cisco Catalyst 6513 or Cisco 7613 chassis

Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, 6509-NEB-A chassis; can only occupy slots 9 through 13 in a Cisco Catalyst 6513 chassis

Onboard Memory

256 MB default, upgradable to 512 MB or 1 GB

1 GB default

1 GB default

The 8-port and 16-port 10 Gigabit Ethernet line cards support the Cisco 10GBASE-CX4, -SR, -LRM, -LX4, -LR, and -ER X2 modules.
The 4-port line card supports the Cisco 10GBASE-CX4, -SR, -LRM, -LX4, -LR, -ER, -ZR, -DWDM, -WDM-REC, and -LW XENPAK modules.
XENPAK and X2 of the same type (for example, XENPAK SR and X2 SR) can be connected to each other.

X2 Product ID

XENPAK Product ID

Transceiver Type

Wavelength

IEEE Standard

Maximum Distance/Cable Type 1

X2-10GB-LRM

XENPAK-10GB-LRM

10GBASE-LRM

1310 nm serial

802.3aq

220m over multimode fiber

X2-10GB-SR

XENPAK-10GB-SR

10GBASE-SR

850 nm serial

802.3ae

• 26m over 62.5-micron FDDI grade multimode fiber
• 33m over 62.5-micron 200 MHz x km multimode fiber
• 66m over 50-micron 400 MHz x km multimode fiber
• 82m over 50-micron 500 MHz x km multimode fiber
• 300m over 50-micron 2000 MHz x km multimode fiber

X2-10GB-LR

XENPAK-10GB-LR+

10GBASE-LR

1310 nm serial

802.3ae

10 km over single-mode fiber

X2-10GB-ER

XENPAK-10GB-ER+

10GBASE-ER

1550 nm serial

802.3ae

40 km over single-mode fiber 2

X2-10GB-LX4

XENPAK-10GB-LX4

10GBASE-LX4

WWDM 1310 nm

802.3ae

• 300m over 62.5-micron FDDI grade multimode fiber
• 240m over 50-micron 400 MHz x km multimode fiber
• 300m over 50-micron 500 MHz x km multimode fiber

X2-10GB-CX4 3

XENPAK-10GB-CX4

10GBASE-CX4

Copper

802.3ak

15m over 8 pair 100-Ohm InfiniBand cable

ZR X2 not available today

XENPAK-10GB-ZR

10GBASE-ZR

1550 nm serial

-

80 km over single-mode fiber

DWDM X2 not available today

DWDM-XENPAK-xx.yy

DWDM

32 different wavelengths; C band

100 GHz ITU grid

32 wavelengths over single strand of single-mode fiber; 80 km 4

RX only WDM X2 not available today

WDM-XENPAK-REC

RX only WDM

1530-1565 nm

-

RX only; no TX; 80 km over single-mode fiber

LW X2 not available today

XENPAK-10GB-LW

10GBASE-LW

1310 nm serial

802.3ae

10 km over single-mode fiber

1To calculate the exact distances that your module will support before installation, see optical specifications in the XENPAK and X2 data sheets. The exact distance supported varies according to the number of splices and connectors in a single-mode fiber strand.

2According to the IEEE 802.3ae standard, requires 5 dB 1550 nm fixed loss attenuator for <20 km; a 5 dB fixed loss attenuator is available as a spare, part number WS-X6K-5DB-ATT=.
3To meet EMI compliance, version -02 or above of SR, LR, ER, LX4, CX4 X2 optics are required for WS-X6708-10G-3C and WS-X6708-10G-3CXL, and version -02 or above of SR and CX4, version -03 or above of ER, version -04 or above of LR and LX4 X2 optics are required for WS-X6716-10G-3C and WS-X6716-10G-3CXL. This restriction does not apply to LRM. See release notes or external Q&A for more details.
4Any passive mux demux can be used with the DWDM XENPAKs. The ONS 15216 Flexlayer filters are one of the options.

Product

Specifications

Standard Protocols

IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, and IEEE 802.3aq

Physical Specifications

• Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis
• Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)
• Weight:
• 6708 and 6716: 13 pounds excluding X2s. ¼ pound for each X2.
• 6704: 10 pounds excluding XENPAKs and DFCs. 2/3 pound for each XENPAK.

Environmental Conditions

Operating temperature:

• Agency certified for operation: 32° to 104°F (0° to 40°C)
• Design and tested for operation 32° to 130°F (0 to 55°C)
• Storage temperature: -40° to 167°F (-40° to 75°C)
• Relative humidity: 10 to 90 percent, noncondensing

Operating altitude:

• Agency certified for operation: -150 to 2000m (-500 to 6500 ft)
• Designed and tested for operation -150 to 3000m (-500 to 10000 ft)

Regulatory Compliance

Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:

EMC Standards:
• FCC Part 15 (CFR 47) Class A
• ICES-003 Class A
• VCCI Class A
• EN55022 Class A
• EN55024
• CISPR24
• CISPR 22 Class A
• AS/NZS CISPR 22 Class A
• ETS 300 386
• KN 22 Class A
• EN 50082-1
• EN61000-3-2
• EN61000-3-3
• EN61000-6-1
• CNS13438 Class A
• KN6100 -4 Series

Safety Standards:

• UL 60950-1
• CAN/CSA C22.2 No. 60950
• EN 60950-1
• IEC 60950-1
• AS/NZS 60950-1
• IEC 60825 Class 1
• EN 60825 Class 1
• 21CFR 1040

NEBS Criteria Levels

• SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, GR-1089-CORE, issue 4)

ETSI

• ETS 300 019-2-1, Class 1.1 Storage
• ETS 300 019-2-2, Class 2.1 and 2.2 Transportation
• ETS 300 019-2-3, Class 3.1E Stationary Use

Network Management

• ETHERLIKE-MIB (RFC 1643)
• IF-MIB (RFC 1573)
• Bridge MIB (RFC 1493)
• CISCO-STACK-MIB
• CISCO-VTP-MIB
• CISCO-CDP-MIB
• RMON MIB (RFC 1757)
• CISCO-PAGP-MIB
• CISCO-STP-EXTENSIONS-MIB
• CISCO-VLAN-BRIDGE-MIB
• CISCO-VLAN-MEMBERSHIP-MIB
• ENTITY-MIB (RFC 2037)
• HC-RMON
• RFC1213-MIB (MIB-II)
• SMON-MIB

Power Requirements

• WS-X6716-10G-3C: 457.8W (10.9A @ 42V)
• WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V)
• WS-X6708-10G-3C: 444.36W (10.58A @ 42v)
• WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)
• WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V)
• WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V)
• WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)
• WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)
• WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)
• WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V)

Go to http://www.cisco.com/go/powercalculator for easy power consumption calculation.

Indicators

• Status: green (operational); red (faulty); orange (module booting)
• Link: green (port enabled and connected); orange (port disabled); off (port enabled and not connected)

Product ID 

Product Description 

10 Gigabit Ethernet Modules

WS-X6716-10G-3C

Cisco Catalyst 6500 16-Port 10 Gigabit Ethernet Module with DFC3C, requires X2

WS-X6716-10G-3CXL

Cisco Catalyst 6500 16-Port 10 Gigabit Ethernet Module with DFC3CXL, requires X2

WS-X6708-10G-3C

Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3C, requires X2

WS-X6708-10G-3CXL

Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3CXL, requires X2

WS-X6704-10GE

Cisco Catalyst 6500 4-Port 10 Gigabit Ethernet Module, requires XENPAK

Distributed Forwarding Card Upgrades

WS-F6700-DFC3CXL

Distributed Forwarding Card-3CXL

WS-F6700-DFC3C

Distributed Forwarding Card-3C

WS-F6700-DFC3BXL

Distributed Forwarding Card-3BXL

WS-F6700-DFC3B

Distributed Forwarding Card-3B

WS-F6700-DFC3A

Distributed Forwarding Card-3A

X2 Optics

X2-10GB-LRM

10GBASE-LRM X2 (multimode fiber)

X2-10GB-SR

10GBASE-SR X2 (multimode fiber)

X2-10GB-LR

10GBASE-LR X2 (single-mode fiber)

X2-10GB-ER

10GBASE-ER X2 (single-mode fiber)

X2-10GB-LX4

10GBASE-LX4 X2 (multimode fiber)

X2-10GB-CX4

10GBASE-CX4 X2 (copper InfiniBand cable)

XENPAK Optics

XENPAK-10GB-LRM

10GBASE-LRM XENPAK (multimode fiber)

XENPAK-10GB-SR

10GBASE-SR XENPAK (multimode fiber)

XENPAK-10GB-LR+

10GBASE-LR XENPAK (single-mode fiber)

XENPAK-10GB-ER+

10GBASE-ER XENPAK (single-mode fiber)

XENPAK-10GB-LX4

10GBASE-LX4 XENPAK (multimode fiber)

XENPAK-10GB-CX4

10GBASE-CX4 XENPAK (copper InfiniBand cable)

XENPAK-10GB-ZR

10GBASE-ZR XENPAK (single-mode fiber)

DWDM-XENPAK-xx.yy

DWDM XENPAK, where xx.yy ranges from 30.33 to 60.61 (single-mode fiber)

WDM-XENPAK-REC

RX only XENPAK (single-mode fiber)

XENPAK-10GB-LW

10GBASE-LW XENPAK (single-mode fiber) (WAN PHY)

Cabling for CX4 Transceivers

CAB-INF-28G-1=

Cisco 1m CX4 patch cable for XENPAK-10GB-CX4

CAB-INF-28G-5=

Cisco 5m CX4 patch cable for XENPAK-10GB-CX4

CAB-INF-28G-10=

Cisco 10m CX4 patch cable for XENPAK-10GB-CX4

CAB-INF-26G-15=

Cisco 15m CX4 patch cable for XENPAK-10GB-CX4

Note:
16-port 10 Gigabit Ethernet module:
• WS-X6716-10G-3C ships with WS-X6716-10GE and WS-F6700-DFC3C.
• WS-X6716-10G-3CXL ships with WS-X6716-10GE and WS-F6700-DFC3CXL.
• The front panel of these modules is labeled as WS-X6716-10GE.
• Cisco IOS® Software commands display WS-X6716-10GE with either WS-F6700-DFC3C or WS-F6700-DFC3CXL.
8-port 10 Gigabit Ethernet module:
• WS-X6708-10G-3C ships with WS-X6708-10GE and WS-F6700-DFC3C.
• WS-X6708-10G-3CXL ships with WS-X6708-10GE and WS-F6700-DFC3CXL.
• The front panel of these modules is labeled as WS-X6708-10GE.
• Cisco IOS Software commands display WS-X6708-10GE with either WS-F6700-DFC3C or WS-F6700-DFC3CXL.

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.

Copyright © 2024 WeKuData AB