DATA SHEET
CISCO 10000 SERIES GIGABIT ETHERNET HALF-HEIGHT LINE CARD
Figure 1
Cisco 10000 Series Gigabit Ethernet Half-Height Line Card
In order to continue to meet customers' increasing needs for modularity and density, Cisco® introduces a new Cisco 10000 Series Gigabit Ethernet Line Card that provides customers with double the Gigabit Ethernet density in a Cisco 10000 Series. Benefits of the new line card include the following:
• Provides maximum modularity for flexible deployment options
• Doubles the Gigabit Ethernet density of the Cisco 10000 Series to maximize slot utilization and decrease system cost per port
• Supports modular Gigabit Ethernet optics for deployment flexibility
• Supports standards-based Gigabit Ethernet implementation for compatibility and interoperability
Table 1 gives the features and benefits of the Cisco 10000 Series Gigabit Ethernet Half-Height Line Card.
Table 1. Features and Benefits of Cisco 10000 Series Gigabit Ethernet Half-Height Line Card
Features |
Benefits |
Provides maximum modularity to enable flexible deployment options |
With the implementation of a half-height line card, the Cisco 10000 Series doubles its modularity as well as its density for LAN interfaces. |
Doubles the Gigabit Ethernet density of the Cisco 10000 Series to maximize slot utilization and decrease system cost per port |
Doubling its Gigabit Ethernet density enables customers to insert dual Gigabit Ethernet uplinks without taking up an additional line card slot. |
Supports modular Gigabit Ethernet optics for deployment flexibility |
The Cisco 10000 Series Gigabit Ethernet Half-Height Module supports modular small form-factor pluggable (SFP) transceivers to ensure that customers have maximum flexibility in configuring physical network interfaces. The 1000BASE-SX and 1000BASE-LX SFP transceivers available in these modules are hot-swappable, providing a quick and easy method of changing physical interfaces. |
Supports standards-based Gigabit Ethernet implementation for compatibility and interoperability |
The Cisco 10000 Series Gigabit Ethernet Half-Height Module is based on the IEEE 802.3z industry standard-ensuring interoperability and compatibility with other standards-based Gigabit Ethernet products in the customer's network. Gigabit Ethernet standards compliance along with Cisco manageability and standard Cisco IOS® Software ensures high-speed interoperability with existing Gigabit Ethernet products in the Cisco 12000 Series and Cisco Catalyst® switches. |
HARDWARE FEATURES
• Single-port Gigabit Ethernet line card running at 1 Gbps, full duplex
• Support for jumbo frames (up to 9180 bytes in size)
• Support for online insertion and removal (OIR)
• Functionality in any Cisco 10000 Series interface card slot with a Cisco 10000 Series Carrier (product number ESR-HH-CARRIER)
• Hot-swappable SFP optical modules (SFP transceivers)
• 16-MB receive packet memory
• Error-Correction Code (ECC) protection for the processor local memory and packet memory
• Support for the following SFP transceivers:
–1000BASE-SX multimode, compliant with IEEE 802.3z specifications
–1000BASE-LX and LH compliant with IEEE 802.3z specifications
–1000BASE-ZX compliant with IEEE 802.3z specifications
• 256 pairs of packet and byte performance counters based on the source address of received frames
• 256 pairs of packet and byte performance counters based on the destination address of transmitted frames [ECS1]
ETHERNET FEATURES
• Media Access Control (MAC) with full-duplex operation
• Hardware address filtering on received frames of up to 4096 address entries
• 802.3x flow control
• Ethernet encapsulation formats:
–Ethernet V2
–802.2 Service Advertising Protocol (SAP)
–802.2 Subnetwork Access Protocol (SNAP)
SOFTWARE FEATURES
• Autonegotiation
• 64-bit counters
• 802.1Q virtual LANs (VLANs)
• Hot Standby Router Protocol (HSRP)
Table 2 describes the SFP transceiver specifications.
Table 2. Gigabit Ethernet SFP Transceivers
SFP Transceiver |
Wavelength (nm) |
Fiber type |
Core size (microns) |
Modal bandwidth (MHz/km) |
Cable distance |
1000BASE-SX
SFP-GE-S=
(previously GLC-SX-MM=) |
850 |
Multimode fiber (MMF) |
62.5
62.5
50.0
50.0 |
160
200
400
500 |
722 ft (220m)
902 ft (275m)
1,640 ft (500m)
1,804 ft (550m) |
1000BASE-LX/LH
SFP-GE-L=
(previously GLC-LH-SM=) |
1300 |
MMF1 Single-mode fiber (SMF) |
62.5
50.0
50.0
8 to 10 |
500
400
500
- |
1,804 ft (550m)
1,804 ft (550m)
1,804 ft (550m)
32,808 ft (10 km) |
1000BASE-ZX
GLC-ZX-SM= |
1550 |
Single-mode fiber (SMF) |
9, 10 |
- |
43.4 to 62 miles
(70 to 100 km)2 |
1. A mode-conditioning patch cord (part number CAB-GELX-625 or equivalent) is required. If you use an ordinary patch cord with MMF, 1000BASE-LX SFPs, and a short link distance (tens of meters), this can cause transceiver saturation, resulting in an elevated bit error rate (BER). In addition, when you use the long-reach SFP with 62.5-micron-diameter MMF, you must install a mode-conditioning patch cord between the SFP and the MMF cable on both the transmit and receive ends of the link. The mode-conditioning patch cord is required for link distances greater than 984 ft (300m).
2. 1000BASE-ZX SFP can reach up to 100 km by using dispersion-shifted SMF or low attenuation SMF; the distance depends on fiber quality, number of splices, and connectors.
ENVIRONMENTAL CONDITIONS
• Storage temperature: -38 to 150°F (-40 to 70°C)
• Operating temperature, nominal: 41 to 104°F (5 to 40°C)
• Operating temperature, short term: 23 to 131°F (-5 to 55°C)
• Storage relative humidity: 5 to 95% relative humidity (RH)
• Operating humidity, nominal: 5 to 85% RH
• Operating humidity, short term: 5 to 90% RH
• Operating altitude: -60 to 4000m
PHYSICAL SPECIFICATIONS
• Height: 7.8 in. (19.8 cm)
• Width: 1.3 in. (3.3 cm)
• Depth: 11 in. (27.9 cm)
• Weight: 2 lb (0.9 kg)
LEDS
• Link status (green, one per port)
• Transmit activity (green, one per port)
• Receive activity (green, one per port)
• Fail (yellow, one per card)
NETWORK MANAGEMENT
• Network management via
–Telnet (command-line interface [CLI])
–Console port (CLI)
–Simple Network Management Protocol (SNMP)
• Management Information Base II (MIB-II)
• RFC 1213
• RFC 1573
HALF-HEIGHT LINE CARD POWER BUDGET
• Unit power: 15.98W
SFP TRANSCEIVER SPECIFICATIONS
• 1000BASE-SX transceiver
–Wavelength: 850 nm
–Power budget: 7.5 dB
–Transmit power: -9.5 to 0 dBm
–Receive power: -17 to 0 dBm
–Connector: LC
• 1000BASE-LX or LH transceiver
–Wavelength: 1310 nm
–Power budget: 7.5 dB (multimode fiber), 8 dB (single mode)
–Transmit power: -11.5 to -3 dBm (multimode fiber), -11 to -3 dBm (single mode)
–Receive power: -19 to -3 dBm (multimode and single-mode fiber)
–Connector: LC
• 1000BASE-ZX transceiver
–Wavelength: 1550 nm
–Power budget: 8 dB (single mode)
–Transmit power: 0 to +5 dBm (single mode)
–Receive power: -23 to 0 dBm (single-mode fiber)
–Connector: LC
PRODUCT REGULATORY APPROVALS
• UL60950/CAN/CSA-C22.2 No. 60950-00, third edition, dated December 1, 2000, with no deviation considered to be less stringent than IEC 60950
• EN60950 with Amendments 1-4, for CE Marking to the LVD directive
• IEC 60950 third edition with Amendments 1-4, including all national/group deviations
• AS/NZS 60950:2000
• AS/NZS 3260-1993 with Amendments 1-4
• ACA TS001-1997
LASER SAFETY
• 21 CRF 1040, Subchapter J
–EN60825-1
–EN60825-2
PRODUCT REGULATORY COMPLIANCE
Electromagnetic Emissions Certification
• AS/NZ 3548:1995 (including Amd I + II) Class B
• EN55022:1998 Class B
• CISPR 22:1997
• EN55022:1994 (including Amd I + II)
• 47 CFR Part 15:2000 (FCC) Class B
• VCCI V-3/01.4 Class 2
• CNS-13438:1997 Class B
• GR1089:1997 (including Rev1: 1999)
Immunity
• EN300386:2000-TNE EMC requirements, product family standard, high priority of service, central office and noncentral office locations
• EN50082-1:1992/1997
• EN50082-2:1995-Generic Immunity Standard, Heavy Industrial
• CISPR24:1997
• EN55024:1998-Generic ITE Immunity Standard
• EN61000-4-2:1995+AMD I + II-ESD, Level 4, 8-kV contact, 15-kV air
• IEC-1000-4-3:1995+AMD 1-Radiated Immunity, 10 V/m
• IEC-1000-4-4:1995-Electrical Fast Transients, Level 4, 4 kV/B
• IEC-1000-4-5:1995+AMD 1-DC Surge Class 3, AC surge Class 4
• EN61000-4-6:1996+AMD 1-RF Conducted Immunity, 10V rms
• EN61000-4-11:1995-Voltage Dips and Sags
• ETS300 132-2:1996+corregendum, Dec. 1996
• GR1089:1997 (including Rev1: 1999)
Network Equipment Building Systems
• Level 3 compliant
• Bellcore SR-3580 Criteria Levels, issued November 1995
• GR1089-Core: Electromagnetic Compatibility & Electrical Safety, issued December 1997
• GR63-Core: Physical Protection Requirements, issued October 1995
• SBC equipment requirements: TP76200 MP and TP76400 MP
• Verizon equipment requirements: SIT.NEBS.TE.NPI.2000.004 Rev. 1
PRODUCT SYSTEM REQUIREMENTS AND COMPATIBILITY
Hardware Requirements
• Chassis-The Cisco 10000 Series Gigabit Ethernet Half-Height Line Card is supported in all Cisco 10000 Series chassis.
• Performance routing engines (PREs)-The line card is supported with all PREs available on the Cisco 10000 Series.
• Line cards-The line card is supported with all line cards available on the Cisco 10000 Series as of October 1, 2002.
• Carrier-The Cisco 10000 Series Gigabit Ethernet Half-Height Line Card requires a carrier (part number ESR-HH-CARRIER) for compatibility with the Cisco 10000 Series Chassis.
Software Requirements
ORDERING INFORMATION
Table 3 gives product part numbers for the Cisco 10000 Series Gigabit Ethernet Half-Height Line Card.
Table 3. Part Numbers for Cisco 10000 Series Gigabit Ethernet Half-Height Line Card
Product number |
Product description |
ESR-HH-1GE |
1-port Gigabit Ethernet half-height line card |
ESR-HH-1GE= |
1-port Gigabit Ethernet half-height line card, spare |
ESR-HH-CARRIER |
Full-length base carrier for half-height line card |
ESR-HH-CARRIER= |
Full-length base carrier for half-height line card, spare |
ESR-HH-COVER |
Blank filler for half-height line card |
ESR-HH-COVER= |
Blank filler for half-height line card, spare |
SFP-GE-S |
1000BASE-SX pluggable transceiver |
SFP-GE-S= |
1000BASE-SX pluggable transceiver, spare |
SFP-GE-L |
1000BASE-LX pluggable transceiver |
SFP-GE-S= |
1000BASE-LX pluggable transceiver, spare |
GLC-ZX-SM |
1000BASE-ZX pluggable transceiver |
GLC-ZX-SM = |
1000BASE-ZX pluggable transceiver, spare |
All Cisco 10000 Series half-height line cards require a carrier (product number ESR-HH-CARRIER). Because each carrier holds two half-height line cards, a blank (product number ESR-HH-COVER) is shipped with any carrier with open half-height line card slots.
Cisco recommends that customers who order spare carrier or half-height line cards also order enough blanks to ensure that the configured system has no empty slots.
MIGRATION PROGRAM
A Cisco Technology Migration Plan (TMP) has been established for this product.
The Cisco TMP is a sales program that allows customers to trade in Cisco products to receive a trade-in credit toward the purchase of any new Cisco product. The program underscores Cisco's commitment to the customer in terms of end-to-end product solutions as well as emphasizing to the customer Cisco's commitment to provide effective migration options in the face of ever-changing network requirements.
SERVICE AND SUPPORT
Cisco Systems® offers a wide range of service and support options for its customers.